二四六天空彩选好资料

Welcome to the official website of Taixing Zhicheng Lubrication Equipment Factory!

0523-87892801 National Hotline: 0523-87892801
Position: 二四六天空彩选好资料 > FAQ > Details

What are the precautions during the assembly of the cooler

Source: http://le-signal.com/ Time: 2019-05-14

The tubular cooler fresh air system can recover the heat and humidity of indoor exhaust air to process the fresh air, effectively saving energy. At the same time, the column-type cooler fresh air system can filter and purify the outdoor fresh air to ensure that the air entering the room is fresh and clean. The correct installation of the tubular cooler has a great impact on the use of the fresh air system of the tubular oil cooler. So how do you install a tube cooler ? Let's discuss this issue with you:

1.The distance between the fresh air outlet and the return air is required
If the fresh air outlet and the return air outlet are too close, the fresh air and the return air will be short-circuited and discharged directly into the fresh air pipe to return to the room. The fresh air volume cannot meet the indoor fresh air requirements and cannot play the role of the fresh air system. Therefore, there is a certain distance between the fresh air outlet and the exhaust air outlet to avoid the occurrence of new and return air short circuits.

2. Careful placement of the tube-type oil cooler indoors
The tube-type cooler generates a certain amount of noise during operation. Therefore, the tube-type cooler is generally arranged in a place where the noise requirement is not high, such as a kitchen, a bathroom, and the like. Secondly, the tube cooler needs to be connected to the fresh air pipe, so it is necessary to reserve enough space for the connection. In addition, some problems will inevitably occur during the use of the equipment and need to be repaired. A sufficient position should be reserved for the smooth maintenance.

3. Pay attention to the pipe tube oil cooler takeover
In order to protect the tube-type cooler, generally the tube-type cooler cannot directly contact the fresh air pipe, so as to prevent the weight of the pipeline from directly pressing on the tube-type cooler and causing damage to the machine. Usually, the fresh air pipe is connected to the host. Keep a certain gap in the part and fill it with tape. At the same time, determine the direction of the host and determine the inlet and outlet signs to prevent the new air pipe and return air pipe from being reversed.

related 二四六天空彩选好资料

Related Products

BR0.05 plate heat exchanger

BR0.1 plate heat exchanger

BR0.12 plate heat exchanger

BR0.2 plate heat exchanger

BR0.23 plate heat exchanger
contact us

白先生 Contact: Mr. Bai

0523-87892801 Phone: 0523-87892801

13605265960 Mobile: 13605265960

0523-87892616 Fax: 0523-87892616

泰兴市黄桥镇白庄社区居委会14组 Address: Group 14 of Baizhuang Community Resident Committee, Huangqiao Town, Taixing City