Reasons why the plate heat exchanger is not ideal
Source: http://le-signal.com/ Time: 2019-02-18
Many customers report that the effect of the plate heat exchanger is not particularly good, so what should be done in this case? What causes it? Let ’s take a look together.
1. System configuration reasons. The plate heat exchanger only plays a role of heat conversion and follows the law of constant energy conduction, that is, the heat released from the hot side is equal to the heat absorbed by the cold side. In many cases, the heat from the heating system from the heating side does not have enough cold side cooling water Take away, such as insufficient water quantity and water temperature, which causes the temperature of the hot side of the Jiangsu plate heat exchanger not to come. If this is the reason, the heat exchanger will be useless even if it is large.
2, Jiangsu plate heat exchanger itself. Many users only provide the heat exchange area when purchasing the heat exchanger. There is no specific data such as heat exchange volume, medium flow rate, and inlet and outlet temperature. As a result, although the plate area heat exchanger of Jiangsu has the correct model area, the process combination is not reasonable. , Also can not achieve the desired effect, even on this basis to increase the area is useless.
白先生 Contact: Mr. Bai
0523-87892801 Phone: 0523-87892801
13605265960 Mobile: 13605265960
0523-87892616 Fax: 0523-87892616
泰兴市黄桥镇白庄社区居委会14组 Address: Group 14 of Baizhuang Community Resident Committee, Huangqiao Town, Taixing City