Things to do before using a cooler
Source: http://le-signal.com/ Time: 2017-08-21
Under normal conditions, the pressure difference between the inlet and outlet of the cooler is measured and inspected to determine whether the tube housing is available. When the tube is leaking, it is probably hurried to check whether the tube is damaged. Once found, it is necessary to rush to repair.
Due to the violent sensation during the operation of the heat exchange tube, the leakage of the tube is formed. It should be necessary to stop the inspection and repair it in time.
In the process of normal use, it is possible to regularly disassemble the heads and tube boxes at both ends of the cooler, and timely clean the foreign matter in the shell of the tube and the stolen goods on the outside of the tube.
Regularly check the two ends of the cooler, the official box for corrosion, rust, cracks and trachoma, etc., as soon as they are found and repaired in time.
Perform pressure test and leak test on the cooler control and the shell at regular intervals, check the tightness of the bolts, and do a good job of heat preservation and anticorrosion methods (partial testing is necessary if necessary).
The control should also be regularly sorted out to see if the heat exchange tubes are deformed and tortuous.
白先生 Contact: Mr. Bai
0523-87892801 Phone: 0523-87892801
13605265960 Mobile: 13605265960
0523-87892616 Fax: 0523-87892616
泰兴市黄桥镇白庄社区居委会14组 Address: Group 14 of Baizhuang Community Neighborhood Committee, Huangqiao Town, Taixing City