Structure of air cooler
Source: http://le-signal.com/ Time: 2019-08-28
What is the structure of the air cooler produced by the air cooler manufacturer? The structure of the air cooler is similar to that of the air-cooled condenser. It is mainly composed of heat transfer tubes, fins, baffles, fans, air collection tubes and liquid separators.
空气冷却器的结构空气冷却器是利用制冷剂在管内沸腾吸热，由液体变成气体，管外的流动的空气因此被冷却下来。 The structure of the air cooler produced by the air cooler manufacturer The air cooler uses the refrigerant to boil and absorb heat in the tube, which changes from liquid to gas, so the air flowing outside the tube is cooled down. That is, after the high-pressure refrigerant liquid from the condenser is separated by the liquid distributor, it flows through the respective capillaries to reduce the pressure and temperature, and then enters the serpentine heat transfer tube. It boils and absorbs the heat of the air outside the tube. The air pipe is sucked away by the compressor.
Because the surface temperature of the finned tube is very low, when the moist air flows through the finned tube, the water vapor in the air will condense into water and precipitate, so the condensed water is discharged during the operation of the air conditioner. 蒸发器翅片管一般为纯铜，翅片为铝质，其厚度和节距以不同生产厂家及不同设备规格而定。 The evaporator fin tubes produced by air cooler manufacturers are generally pure copper and the fins are aluminum. The thickness and pitch of the finned tubes are determined by different manufacturers and different equipment specifications.
白先生 Contact: Mr. Bai
0523-87892801 Phone: 0523-87892801
13605265960 Mobile: 13605265960
0523-87892616 Fax: 0523-87892616
泰兴市黄桥镇白庄社区居委会14组 Address: Group 14 of Baizhuang Community Neighborhood Committee, Huangqiao Town, Taixing City