二四六天空彩选好资料

Welcome to the official website of Taixing Zhicheng Lubrication Equipment Factory!

0523-87892801 National Hotline: 0523-87892801
National Consulting Hotline 0523-87892801

    Focusing on the field of lubrication equipment for many years, to create heat exchange equipment MANY YEARS OF lubrication FOCUS, CAST IS SPECIAL

  • Taixing Zhicheng Lubrication Equipment Manufacturing Factory is a professional team engaged in research, design, development, manufacturing, operation and sales of heat exchange equipment for many years.

    Strict and perfect quality control system to make product quality more stable STRICT PERFECT QUALITY CONTROL SYSTEM, MAKE PRODUCT QUALITY MORE STABLE

    High quality guaranteed, customer satisfaction and retention

    The interests of the kind of preferential policies for you

About Us / ABOUT US

+ More

Taixing Zhicheng Lubrication Equipment Manufacturing Factory Taixing Zhicheng Lubrication Equipment Manufacturing Factory is located in Liuchen Industrial Park, Huangqiao Town, Taixing City, Jiangsu Province. Specializing in the production of flue gas heat exchangers, plate heat exchangers, heat exchange units, shell and tube heat exchangers, air coolers and other heat exchange equipment totaling more than 400 specifications. Is a professional team engaged in research, design, development, manufacturing, operation and sales of heat exchange equipment for many years. It integrates design, manufacturing, sales and service in one. The company has strong technical strength, good processing equipment, complete testing methods and stable quality. The products produced by this enterprise are widely used in petrochemicals.

Taixing Zhicheng Lubrication Equipment Manufacturing Factory

Address: Group 14 of Baizhuang Community Resident Committee, Huangqiao Town, Taixing City
Phone : 0523-87892801
Phone : 13605265960

company 二四六天空彩选好资料
What conditions will cause the damage of the Jiangsu plate heat exchanger gasket

Jiangsu plate heat exchanger is a kind of key equipment with high safety. When the gasket is damaged, external dripping can be seen. The heat exchanger will drip slightly at the beginning, and in process equipment with large pressure shock, there may be a large leak due to the damage of the heat exchanger gasket.

Industry 二四六天空彩选好资料
Working principle of tube-type oil cooler

Column tube oil cooler is a wall-type heat exchanger, which is often used in industrial hydraulic equipment. Its working principle is: water (cold fluid) goes inside the tube, and oil (hot fluid) flows from the oil inlet into the baffle and is repeatedly deflected. After going outside the tube, the hot and cold fluids exchange heat through the tube wall, the water becomes hot, and the oil becomes cold and flows out from the oil outlet. Cooling tubes are usually made of copper or aluminum alloy with good heat transfer performance. The purpose of providing baffles is to increase the heat exchange area.

Importance of Reasonable Selection of Heat Exchanger Temperature Difference and Activity Resistance
The importance of reasonable selection of the main heat exchanger temperature difference and active resistance. The temperature difference is reduced by 0.5 K (that is, reduced by about 16%). The amount of capital money added by Jiangsu plate heat exchangers and the cost savings of one and a half years of operation are approximately appropriate, while the temperature difference is expanded by 0.5 K (that is, expanded by 16%). About one year, the increase of one year's operating costs has exceeded the amount that the cost of heat exchange equipment has been reduced due to the expansion of the temperature difference.
Structure of high-efficiency plate heat exchanger
High-efficiency plate heat exchangers are mainly composed of a frame and a plate, and thin plates made of various materials are pressed into various shapes with various types of abrasive tools. There are corner holes in the four corners for the flow channel of the medium.
Where are plate heat exchangers unsuitable?
The operating temperature of the plate heat exchanger below 250 ℃ depends on the temperature that the gasket can accept. When using rubber elastic gaskets, the maximum working temperature is below 200 ℃; when using compact asbestos wool gaskets, the working temperature is 250 ~ 260 ℃.
What are the precautions during the assembly of the cooler
The tubular cooler fresh air system can recover the heat and humidity of indoor exhaust air to process the fresh air, effectively saving energy. At the same time, the column-type cooler fresh air system can filter and purify the outdoor fresh air to ensure that the air entering the room is fresh and clean. The correct installation of the tubular cooler has a great impact on the use of the fresh air system of the tubular oil cooler. So how do you install a tube cooler? Let's discuss this issue with you:
Extensive use of coolers
Air coolers are heat exchangers that use air to cool hot fluids. The hot fluid in the tube exchanges heat with the air outside the tube through the tube wall and fins. The air used is usually supplied by a ventilator. Air cooler can be used for cooling or condensing. Air cooler manufacturers are widely used in the condensing of steam at the top of oil refining and petrochemical towers; the cooling of reflux oil and bottom oil
Installation and cleaning of plate heat exchanger
The foundation for installing the heat exchanger must be such that the heat exchanger does not sink or the pipe transfers excessive deformation to the nozzle of the heat exchanger. The foundation is generally divided into two types: a saddle-shaped foundation made of brick
Sealing method of cooler
1. Bare tube (surface without rolled fins) type heat transfer tube, with high heat transfer coefficient and strong anti-pollution ability. 2. The tube-type oil cooler uses high-quality copper tubes as cooling pipes and is processed into fin-shaped heat sinks, which has a small product size and a large heat exchange area.
Causes of leaks in thrust bearing oil coolers
The cooling method of the thrust bearing of the water turbine engine is an internal circulation water cooling type. The frictional heat of the bearing is used to exchange heat with the cooler to establish thermal dynamic balance, so that the temperature of the bearing shell can be stabilized within the normal operating range. Thrust bearing oil cooler is one of the important parts of hydro-generator. However, air cooler manufacturers will leak during use.
Manufacturing process and cleaning requirements of air cooler
The air cooler mainly uses air as its coolant in the process of use. The equipment is mainly composed of a bracket, a tube bundle and a fan during the use of the device. The hot fluid of the air cooler flows in the tube, and the air is outside the tube bundle. Blow through.
白小姐中特网必选一肖 足球彩票 白小姐四肖必选一肖 三肖精选10码 159彩票 六彩开奖网站